BOTOU XINGHE
ROLL FORMING MACHINERY CO.، LTD
پس از همکاری، مشارکت طولانی! کیفیت برای اولین بار برنده شدن است!
BOTOU XINGHE
ROLL FORMING MACHINERY CO.، LTD
پس از همکاری، مشارکت طولانی! کیفیت برای اولین بار برنده شدن است!
جزئیات محصول:
پرداخت:
|
| Condition: | New | Type: | Steel Frame & Purlin Machine |
|---|---|---|---|
| Tile type: | Galvanizes steel | Voltage: | 380v 50hz 3phase |
| Power: | 11 kw+5.5kw | After-sale: | 12 months |
| برجسته: | cz purlin roll forming machine,c channel roll forming machine,c channel roll forming machine |
||
Automatic C Purlin Channel Roll Forming Machine
We there are two different types, C purlin and Z purlin.Steel purlin is used on the roof or wall, to support the roof or wall panels.
Technical data:
Full automatic quick-change C purlin roll forming machine
* Material: Galvanized steel sheet, cold/hot rolled coils
* Material Thickness: 1.5-3.0mm
* Forming Speed: 10-15m/min
* Size changing: Automatic
| Uncoiler (manual/automatic) | Weight Capacity | 3T |
| Inner Diameter | 460-520mm | |
| Outside Diameter | 1400mm | |
| Coil width | Max 600mm | |
|
Feeding and straightening device |
Pinch rollers | one pair, up and down |
| Straightening rollers | up three, down four | |
| Diameter of rollers | 75mm | |
| Roll Former | Frame type | single station |
| Forming Roller stand | about 14 Groups | |
| Shaft material | First grade 45# steel, | |
| Shaft diameter | 75mm | |
| Roller material | GCr15 | |
| Drive Type | Chain of transmission | |
| Motor |
15KW reducer with frequency control |
|
| Roll stand type |
split type, two sides forming separately |
|
| Size changing time | 15 min | |
| Automatic size changed by slide screw and angle gear which guarantee the complete synchronization and the material thickness is adjusted by eccentric distance of passive rollers. | ||
| Punching | Type | Hydraulic |
| Mould material | Cr12 | |
| Holes distance | Can be adjusted | |
|
Cutting 1 Hydraulic cutter |
Type | After-cutting, hydraulic |
| Material of mould | Cr12 | |
| Cutting tolerance | 10M+/- 2.0 mm | |
|
Cutting 2 Fly saw |
option | |
| PLC cabinet | PLC | PANASONIC |
| Length Controller | Encoder | |
| Operation | Touch Screen | |
| Transducer | Mitsubishi | |
| Hydraulic station | Power | 7.5 KW |
| Hydraulic pressure | 11 Mpa | |
| Runout Table | Non-power type | |
تماس با شخص: Kim Lee
تلفن: +8613754536227
