BOTOU XINGHE
ROLL FORMING MACHINERY CO.، LTD
پس از همکاری، مشارکت طولانی! کیفیت برای اولین بار برنده شدن است!
BOTOU XINGHE
ROLL FORMING MACHINERY CO.، LTD
پس از همکاری، مشارکت طولانی! کیفیت برای اولین بار برنده شدن است!
جزئیات محصول:
پرداخت:
|
| Condition: | New | Type: | Tile Forming Machine |
|---|---|---|---|
| Tile type: | Colored Steel / PPGI / Galvanized Steel Coil | Use: | Roof sheet |
| Power: | 4.0+4.0kw | Voltate: | 380V,50HZ,3 Phase |
| برجسته: | metal roll forming machine,sheet roll forming machine,sheet roll forming machine |
||
(1). Brief Introduction
The Roof Panels made by our Roll Forming Machine have beautiful appearance and bright color.
They are widely used in gardens, factories, resorts, hotels, exhibition halls, vacationlands,
ancient architectures and modern villas.
(2). Working Flow of Roll Forming Machine
Decoiling the sheet-Sheet guiding-Roll forming-Measure length-Cutting the panel-Panels to the supporter
(3).Technical Detail
A. General
| Suitable Material | Q235 or equivalent |
| Material Thickness | 0.3-0.7 mm |
| Material Width | 914, 1000, 1200, 1220 or 1250, as per the drawing |
| Dimension | About 6.5*1.3*1.1m(L*W*H) , as per the drawing |
| Working Space | About 16.5*2.8m(L*W) , as per the drawing |
|
Length of the Sheet |
You can set the length according to your need. It is controlled by PLC which can ensure the accuracy of ±1mm. |
| Cutting |
Automatically stop and cutting when it comes to the set length. |
B. Components Details
| Roller Material | A3 steel. Hard chrome plating, 0.05mm. |
| Main Frame | 350# steel. More stable and no shaking. |
| Middle Plate |
16mm. We use thicker plates to ensure stability of our products. |
| Forming Steps | 11-16, according to the drawing. |
| Shaft Material | Φ70 mm, high grade 45# steel. |
|
Treating process: tempering- finish turning, high rigidity, hard to deform. |
|
|
Cutting Blade Material |
Cr12, hardness HRC60-62. |
| Treating process: heat treatment- plane abrasion- wire electrode cutting. |
C. Electric Components
| Suitable Power | 380V, 50 Hz, 3 phase or according to your need. |
| Screen | 7 inch touch screen, easy to operate. |
| PLC | Delta |
|
well-adapted to various conditions, such as moisture, electromagnetic disturbance. |
|
| Frequency Converter |
Delta. It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm). |
|
Length Measurement Device |
Omron, made in Japan. |
| It features with high accuracy and stability. |
(4)Machine shows
تماس با شخص: Kim Lee
تلفن: +8613754536227
